Ubiquiti UniFi switch Gen2 USW-Enterprise-8-PoE Layer3 8x 2,5Gbps + 2x SFP+ POE/POE+ (120W)

Podrobný popis

Technical Specifications
 

Mechanical
Dimensions  200 x 248 x 44 mm (7.9 x 9.8 x 1.7")
Weight  2.4 kg (5.3 lb)
Enclosure material Polycarbonate
Mount material Polycarbonate
 

Hardware
Management interface  Ethernet In-Band
Networking interface (8) 2.5 GbE RJ45 ports
(2) 10G SFP+ ports
PoE interface (8) PoE/PoE+ (Pins 1, 2+; 3, 6-)
Total non-blocking throughput  40 Gbps
Switching capacity  80 Gbps
Forwarding rate  59.52 Mpps
Power method  Universal input, 100—240V AC, 2A Max., 50/60 Hz
Power supply  AC/DC, internal, 150W
Supported voltage range 100—240V AC
Total available PoE 120W
Max. PoE+ wattage per port by PSE 32W
Voltage range PoE mode PoE: 44—57V
PoE+: 50—57V
LCM Display (1) 1.3" color touchscreen
Mounting Desktop-mountable (Do not physically stack the USW-Enterprise-8-PoE)
ESD/EMP protection Air: ± 16kV, contact: ± 12kV
Ambient operating temperature -5 to 45° C (23 to 113° F)
Ambient operating humidity 10 to 90% noncondensing
Certifications CE, FCC, IC
 

Switching Features
Layer 2 features 
IGMP snooping
STP / RSTP with priorities and port-level disable
Port isolation
Storm control
Voice VLAN
Port mirroring
LACP port aggregation
Multicast / broadcast rate limiting
MAC address blocking
Flow control
802.1X control
Jumbo frames
Proprietary loop protection
DHCP snooping / guarding
Egress rate limit
LLDP-MED
Port restricted by MAC
Device isolation with ACLs
Layer 3 features 
DHCP for locally-managed networks
DHCP relay
Inter-VLAN routing between networks on same switch
Static routing between local networks
 

LEDs
System  Status
Ethernet Link/activity
SFP+ Link/activity
 

Application Requirements
UniFi Network  Version 6.3.51 and later